Recent Oils extreme Pip

What has changed with the oils within the last year? I’ve used MTS for around 8 years, with next to no PIP whatsoever, and that’s using Sust 250, Test 300, Test Prop, Test 400, Tren A + E, EQ. Recently I’ve found lots of batches to have awful pip.

Test 400 went in the bin.
Sust 250 gave a hot burning sensation during injection with lip lasting over a week.
Test 300 is hit and miss every batch. Some are good, some are awful.

From reading on here, PIP is accepted when it shouldn’t be. it’s not part of “the game”. How can one vial be smooth and the next awful? How can it be smooth for years then awful all of a sudden.

Injection technique is fine, I’ve been pinning for years. But within this last year or so the product seems to have gone down hill.

Yes the high concentration oils will have a bit of pip, but a sust 250? Definitely not.

Brother PIP is part of the game when product have something inside . I use sometimes testoviron Bayer from my pharmacy and i got pip every shoot i do and is pharma grade . Also in the past i got an inflamation on my body and every shoot i did got inflamed and i try many brands and even pharma and same . I decide to take a anti inflamatory and antibiotic and i can start again and no more inflamations .

There’s a difference between your usual pip, and a hot burning sensation whilst pushing the plunger in.
And also it is not part of the game lol. Especially with your normally dosed oils, pip can be avoided (high concentration yes I’ll agree it’s normal).

Something is different. When you use the same brand for years, and all of a sudden you start getting bad pip, something has changed.

Even lowering the dose for daily shots, mixing with other oils, it’s still burning or extreme pip.

I have informed the chef and checking cooking procedures. Possible identification and resolution on the way.

Appreciate that mate. Ive still got the sust somewhere, I’ll dig out the batch number and email you

Ricer wrote:What has changed with the oils within the last year? I’ve used MTS for around 8 years, with next to no PIP whatsoever, and that’s using Sust 250, Test 300, Test Prop, Test 400, Tren A + E, EQ. Recently I’ve found lots of batches to have awful pip.

Test 400 went in the bin.
Sust 250 gave a hot burning sensation during injection with lip lasting over a week.
Test 300 is hit and miss every batch. Some are good, some are awful.

From reading on here, PIP is accepted when it shouldn’t be. it’s not part of “the game”. How can one vial be smooth and the next awful? How can it be smooth for years then awful all of a sudden.

Injection technique is fine, I’ve been pinning for years. But within this last year or so the product seems to have gone down hill.

Yes the high concentration oils will have a bit of pip, but a sust 250? Definitely not.

I have had this issues too on last batch of T400 after 4 shots I could not use it anymore. Big lumps and sore as fuck at only 1ml per shot. Gave it to a mate and he got 3 shots in and same thing. We then threw it in the bin. I have been a customer of MTS since 2015 and spent thousands of dollars on products and always top notch smooth as and yea have used T400 in the past @ 3ml in one shot and it was always smooth. They need to inprove their quality control.

Agreed, MTS has been fantastic and I’ve refused to use any other brand due to always being reliable and good quality.

I don’t want this to come across as a bashing post as it’s far from that, I just wanted to highlight an issue to hopefully get it resolved - which is exactly what BigDaddy is doing already.

Cheers

The quyality of MTS is always there so if you buy primo 100mg is primo 100mg inside and same with all products . But like Big Daddy says they will fix what is wrong but like i said as nothing to do with quality because i keep gaining quality muscle with great condition

I wouldn’t have used MTS for 8+ years and it be the only brand I use if the quality wasn’t there. I’m not knocking the quality

Ricer BIGGDADDY already said he will check what is wrong and fix it because MTS as a big name and huge reputation on market and will do all to keep this image . I use it since he got famous in 2015 at forums and since them i only use MTS

Lol, I know what he’s said, and once he said it, I left it with him. After that I’ve only responded to other posts agreeing the quality is good

It can happen a small bacteria is getting into the vial during the process, it's rare but it can happen. Last time I had it, It was with a single bottle of sustanon, just kept seringues under hot water that injection wasn't painful anymore.
Other bottle of sust were absolutely fine.
If you have an issue with MTS, just send them a polite email with your issue, and they will sort you out. They are super professional!!

unfortunately i had terrible pip and swelling with Test E and i've used Med-Tech for years (first order in 2016) and never had problems like that. so i had to throw it in the bin.
Because of that my last order was in 2020. Hope now this issue is fixed so i can reorder from you.
best regards

kuga wrote:unfortunately i had terrible pip and swelling with Test E and i've used Med-Tech for years (first order in 2016) and never had problems like that. so i had to throw it in the bin.
Because of that my last order was in 2020. Hope now this issue is fixed so i can reorder from you.
best regards

I also0 have the same problem even with testoviron bayer from local pharmacy and this happens because i discover i have inflamation in my body and all shoots i done got inflamed , red and hot even pharma grade stuff . And i take antibiotic and then i can shoot all brands without any problem .


Many thinks can be the reason of PIP

It’s nothing to do with mts products China raws test e being the one has been causing pip all over the world then higher solvent needed

But Raws MTS get are always tested before they made the products . They have real good sources , thats why many times they dont have primo because is hard to get 100% real primo

I dont want to be cry baby but I agree with Ricer on this one! I cant use the Test 400 this time. I ordered at least 7 x so far, never ever a problem with the oils. This time its crippling me to the point where I couldn't go to work for 2 days. I told the nice guy over at Gh about it. I tried everything from rotation to warming to change of needles etc. I been doing this for 20 years. Whats going on? I wanted to order a bunch of the test E that was on discount but after the experience I changed my mind.

I used to have some bad pip on the test400. But if I keep it in my hands for like 10 minutes to warm up the pip is pretty much gone.

Wolfman wrote:I dont want to be cry baby but I agree with Ricer on this one! I cant use the Test 400 this time. I ordered at least 7 x so far, never ever a problem with the oils. This time its crippling me to the point where I couldn't go to work for 2 days. I told the nice guy over at Gh about it. I tried everything from rotation to warming to change of needles etc. I been doing this for 20 years. Whats going on? I wanted to order a bunch of the test E that was on discount but after the experience I changed my mind.

Try to take anti biotic and you will see the problem is your body is on inflamation mode and when you fix it every pin will be smooth . Trust me i have the same problem months ago .

Can try an anti inflammatory, see if it helps. Some will disagree but pip can be avoided, but it’s difficult with the high concentration oils like test400.

I grabbed a few Test E on sale and so far so good, I tried 1ml from each vial since receiving them and no issues which is great.

T400…. I’ll leave that alone personally. Too concentrated for my body lol. Some are lucky and get away with it, but I don’t. I’d rather pin more of the smooth stuff.